Enlarge image
PT Ductile Access Hatch C250 class with Fall Safety Mesh Grid
Ductile Iron Access Hatches – 250 kN | EN 124-2 Certified
Our ductile iron manhole covers are equipped with solid top covers and a fall safety mesh grid, designed to withstand loads up to 250 kN, fully compliant with the EN 124-2 standard. These access covers ensure durability and long-term performance in demanding environments.
The PT range of access covers is specifically engineered for installation in dry network chambers, including telecommunications and fibre optic infrastructures. These access hatches are also suitable for a wide variety of underground structures, offering reliable access solutions.
Clear opening (mm) : 1/2P2T 527×884 ; P2T 1161×884 ; L5T 1795×884 ; L6T 2429×884 ; M2T 3062×884
Clear opening (mm)
- 1/2P2T 527×884
- P2T 1161×884
- L5T 1795×884
- L6T 2429×884
- M2T 3062×884
Certification
Complies with the requirements of EN-124-2 standard. Third-party certified with TÜV SÜD Industrie Service GmbH mark.
Place of use
C250 : For gully tops installed in the area of kerbside channels of roads which when measured from the kerb edge, extend a maximum of 0,5m into the carriageway and a maximum of 0,2m into the footway.
Material
Hatch Cover(s) – Spheroidal (ductile) cast iron EN-GJS-500-7.
Finished by water based black paint, environmentally friendly.
Hatch Frame – Steel hot-dip galvanized,
average thickness 90µm according to ISO 1461.
Fall safety mesh grid – Steel mesh of 50 x 50 mm.
Steel hot-dip galvanized, average thickness 90µm according to ISO 1461.
Drawings and dimensions
