Enlarge image
Recessed Access Cover LTR C250 for Concrete Infill
Recessed Access Covers for Infill – 250 kN | EN 124-2
Concrete internal infill cover equipped with ductile iron recessed trays and a steel frame hot-dip galvanized following EN ISO 1461, 250kN according to EN 124-2 standard.
This recessed tray access cover is specifically engineered for block paving and infill applications, allowing seamless integration into surrounding surfaces for a discreet and aesthetic finish. It is ideal for urban environments where visual continuity is essential.
Recess depth 48 mm
Clear opening (mm) : L1TR 527×389 ; L2TR 1161×389 ; L3TR 1381×527 ; L4TR 1876×527 ; 1/4L4TR 884×527
Clear opening (mm)
- L1TR 527×389
- L2TR 1161×389
- L3TR 1381×527
- L4TR 1876×527
- 1/4L4TR 884×527
Certification
Complies with the requirements of EN-124-2 standard. Third-party certified with TÜV SÜD Industrie Service GmbH mark.
Place of use
C250 : For gully tops installed in the area of kerbside channels of roads which when measured from the kerb edge, extend a maximum of 0,5m into the carriageway and a maximum of 0,2m into the footway.
Material
Hatch Cover(s) – Spheroidal (ductile) cast iron EN-GJS-500-7.
Finished by water based black paint, environmentally friendly.
Hatch Frame – Steel hot-dip galvanized,
average thickness 90µm according to ISO 1461.
Options
Handling tools.
Drawings and dimensions
